To print the manual completely, please, download it. USB cable connects to the PC. The Save button only saves the LAN configuration data, but does not apply the configurations. Also enter the username and password assigned by the DDNS service. The tone range is from 0 to 31 for upstream and from 32 to for downstream. Enter your new password.

Uploader: Kagak
Date Added: 11 November 2005
File Size: 48.10 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 88528
Price: Free* [*Free Regsitration Required]

Obtain an updated software image file from ASUS. Click OK to save your changes and then close the Control Panel. Turn on the router.

AM | Networking | ASUS Singapore

The Local Area Connection screen displays the installed network components. To creat an outgoing filter: By pressing ‘print’ button you will print only current page. Click Add to adl a new connection for the WAN interface. Click Update Software to update your software.

Click Apply to save and activate the settings.


Give a name to this traffic class. Click Quick Setup and then follow the instructions below to set up your router.

Asus WL-AM602

The valid range is 0 to Check if zdsl settings are right. Click Browse to locate the file. To creat an incoming filter: The USB driver installation is completed. The system is detecting the new hardware device.

ADSL 2/2+ Ethernet / USB Combo Router

Assign a priority level low, medium, and high to this traffic class. A Files Needed window appears, asking you to specify the location of the file needed.

The technique operates as if separate modems were running in parallel. Plug the AC power cord into a power outlet.

Mounting can be done on wall material including concrete, wood, or drywall. The system logs all the events above or equal to the selected log level, avsl displays only the logged events above or equal to the selected display level.

Flashing The router is trying to connect to your ISP. Ensure that the cables can be easily attached to the router without strain. Power connection To power on the router: Select your connection type and encapsulation mode.


Click Next to continue. Select a service name from the dropdown list and enter the server IP address. This manual also for: Route Click Route to display the information on the routing status. Opening the cover will void any w arranties on the equipment.

Follow the instructions for the operating system that you are using. The router reboots to activate the new settings. Click Add to add to the Access Control List the IP addresses of the management stations allowed to access those local management services.